Power saver mode, Auto low power, Power saver mode -2 – Kyocera copier User Manual
Page 56: Auto low power -2, Copier management
5-2 Copier Management
Copier Management
Power Saver Mode
There are two modes for the Power saver as described below.
Low power mode enables you to conserve energy by maintaining a lower fixing
temperature during periods of copier inactivity.
Shut-off mode conserves even more energy by partially turning OFF the power supply.
Auto Low Power
This function automatically lowers the power after a specified period of copier inactivity.
The Auto low power function can be set to 5 minutes/ 10 minutes/ 15 minutes/ 30
minutes/ 60 minutes/ 90 minutes/ 120 minutes/ 240 minutes. Initially, the mode is set to
function after 15 minutes of copier inactivity. For the key operator setting, see p. 13-39.
The [
POWER SAVER ON/OFF
] LED goes on.
Release Auto Low Power
Press any key on the control panel. The Auto low power will be released and the LCD
screen recovers usual brightness.
Basic Screen