Konica Minolta bizhub 180 - Manual (Page 103)

5 5.4 Making Copies on Manually Fed Paper
5-10 bizhub 180
Be
for
e M
ak
in
g Co
pie
s
Cha
p
ter 5
Loading Paper Into the Bypass Trays
To load plain paper
Load the paper into the Manual bypass one sheet at a time.
Up to 100 sheets of paper can be loaded into the Multi bypass tray. Do not load so
much paper into the Multi bypass tray that the top of the stack is higher than
the
mark.
✎
Note
When paper other than plain paper is loaded, the paper type must be specified.
1 Load the paper into the Bypass tray.
? Have the necessary precautions been observed when loading the paper?
➜ Load the paper so that the front side of the paper faces down.
➜ Make sure that the paper is not curled (rolled).
2 Adjust the Bypass tray extender and the paper guides to fit the size of the paper.