Konica Minolta bizhub 180 - Manual (Page 153)

6 6.6 Making Copies for Filing (“File Margin” function)
6-20 bizhub 180
A
dv
anc
ed
Cop
y
O
p
er
ati
ons
Ch
apt
er
6
To make copies using the “File Margin” function
1 Load the document to be copied.
❍ Refer to “ Loading the Document ” on page 3-9 .
2 Press the [File Margin] key.
The “File Margin” indicator lights up.
? Do you know how large a binding
margin is created?
➜ The width for the binding can be
set between 0 inch (0 mm) and 13/
16 inch (20 mm), in Approx.1/16
inch (1 mm) increments. The
manufacturer’s default setting is 3/
8 inch (10 mm).
➜ The width of the binding margin can be changed using the “MARGIN
SETTING” function in the Utility mode (“
To set the “ BINDING POS. ”
function ” on page 7-44 ).
3 If necessary, specify any other copy settings.
❍ Before Making Copies (p. 5-1)
❍ Advanced Copy Operations (p. 6-1)
4 Using the 10-Key Pad, enter the desired number of copies, and then press the
[Start] key.