Konica Minolta bizhub 180 - Manual (Page 52)

2.7 Power Supply 2
bizhub 180 2-23
Pr
ec
au
tio
n
s
Ch
apte
r 2
Auto Panel Reset
With the auto panel reset operation, the Copy mode screen appears after copying
or after a specified length of time has passed after the last operation is finished.
(Manufacturer’s default setting: 1 minute)
✎
Tip
The length of time until the auto panel reset operation is performed can be set
to 30 seconds or a setting between 1 and 5 minutes.
In addition, the Auto Panel Reset function can be disabled.
For details, refer to
“ To set the “ AUTO PANEL RESET ” function ” on page 7-7.
Energy Save Mode
With the Energy Save mode, the machine automatically enters a standby mode
(Energy Save mode), instead of turning off.
When the machine is in Energy Save mode, the indicator on the [Start] key remains
lit in green, but the display goes off.
✎
Note
If the Auto Shut Off function is activated during Energy Save mode, the machine
turns off.
Conditions for entering Energy Save mode
● The [Energy Save] key is pressed.
● The specified length of time after the last operation has elapsed.
(Manufacturer’s default setting: 15 minutes)
✎
Tip
The length of time until the machine enters Energy Save mode can be set
between 1 and 240 minutes. (Refer to
“ To set the “ ENERGY SAVE MODE ”
(preheat mode) function ” on page 7-8.)
Auto Shut Off
With the Auto Shut Off function, the machine automatically turns off if no operation
is performed for a specified length of time, in order to conserve energy.
(Manufacturer’s default setting: OFF)