Konica Minolta bizhub 180 - Manual (Page 40)

2.5 Part Names and Their Functions 2
bizhub 180 2-11
Pr
ec
au
tio
n
s
Ch
apte
r 2
No. Part Name Description
1 Copy tray Collects copies and printouts fed out facing down.
2 Front cover Opened when replacing the toner bottle. (p. 8-2)
3 1st tray • Holds up to 250 sheets of paper.
• The paper size can be adjusted freely.
• Can be loaded with special paper. (p. 7-17)
4 Manual bypass • Used for manual feeding of paper.
• The paper is fed one sheet at a time.
• Can be loaded with special paper. (p. 5-8)
5 Lock release lever Used to open and close the Side cover.
6 Side cover Opened when clearing paper misfeeds.
7 Mechanical counter Indicates the number of copy and printout pages that were
printed.
8 Power switch Used to turn the machine on and off. (p. 2-22)
9 Parallel interface connector Used for connecting a parallel cable from the computer.
10 RJ45 Connector for
networking Used for connecting the network cable when this machine is
used for Internet faxing, network printing and network scanning.
11 Printer USB connector Used for connecting a USB cable from the computer.
12 Document scales Used to align the document. (p. 3-11)
13 Original cover (optional) Presses down on the document positioned on the Original
glass.
14 Original glass When manually feeding a document, position it on the Original
glass so that it can be scanned.
Position the document face down on the glass. (p. 3-11)
15 Control panel Used to start copying or to make various settings. (p. 2-17)