To copy onto envelopes (non-standard size), To copy onto envelopes (non-standard size) -11 – Konica Minolta bizhub 180 User Manual
Page 88
4.3 Copying Onto Various Types of Media
4
bizhub 180
4-11
Us
efu
l O
pe
ratio
ns
Ch
apte
r 4
To copy onto envelopes (non-standard size)
As an example, the following procedure describes how to make copies onto 7-7/8
inch (200 mm)
×
5-7/8 inch (150 mm) envelopes loaded into the Manual bypass.
✎
Tip
When using the 10-Key Pad to enter a custom paper size, the values are
entered in millimeters. The conversion ratio is shown below.
1 inch = 25.4 mm
✎
Note
When loading non-standard-sized documents and paper, be sure to first
measure their size.
The Document scales at the edges of the Original glass are useful for
measuring documents and paper.
1
Position the document(s) to be copied.
❍
Refer to “
2
Adjust the paper guides for the
Manual bypass, and load the
envelopes.
❍
Load the envelopes with the flap
facing up so that the surface to be
printed on faces downward, as
shown in the illustration.