Konica Minolta bizhub 180 - Manual (Page 130)

5.8 Specifying the Copy Density (“Auto/Photo” Function) 5
bizhub 180 5-37
Be
for
e M
ak
in
g Co
pie
s
Cha
p
ter 5
To make copies after specifying a copy density
1 Load the document to be copied.
❍ Refer to “ Loading the Document ” on page 3-9 .
2 Press the [Auto/Photo] key to select
between the “TEXT/P[A]” (AUTO),
“TEXT[A]” (AUTO), “PHOTO”,
“TEXT/P”, or “TEXT” settings.
❍ The current setting appears on the
left side of the screen.
3 If the “PHOTO”, “TEXT” or “TEXT/P”
setting was selected, use
the
and keys to adjust the
density level.
4 If necessary, specify any other copy settings.
❍ Paper (p. 5-22)
❍ Zoom (p. 5-30)
❍ Advanced Copy Operations (p. 6-1)
5 Using the 10-Key Pad, enter the desired number of copies, and then press the
[Start] key.
<When making copies with a light
density level>
<When making copies with a darker
density level>