Konica Minolta bizhub 180 - Manual (Page 197)

7 7.6 Specifying Copy Settings
7-40 bizhub 180
U
til
it
y
M
o
de
–
C
opy
F
un
c
ti
ons
Chap
ter
7
To set the “PAPER PRIORITY” function
1 Select the “COPY SETTING 1” menu.
❍ Refer to “ To select the “ COPY
SETTING 1 ” menu ” on page 7-39 .
2 Press the [1] key from the 10-Key Pad
to select “PAPER PRIORITY”.
3 Using the and keys, select a
paper size or paper tray, and then
press the [Yes] key.
❍ Select from the following paper
trays.
1st tray, 2nd tray, 3rd tray, 4th tray,
5th tray, Multi bypass tray
The “COPY SETTING 1” menu
appears again.
✎
Tip
If there are multiple paper drawers
loaded with paper of the same size
and type as that loaded into the paper drawer given priority with the
“ PAPER
PRIORITY ” function, and if the paper in all of these paper drawers are used,
a message may appear indicating that paper be loaded into a paper drawer
that was not given priority.
In this case, load paper according to the message that appears.