Konica Minolta bizhub 180 - Manual (Page 127)

5 5.7 Specifying a Zoom Setting
5-34 bizhub 180
Be
for
e M
ak
in
g Co
pie
s
Cha
p
ter 5
To make copies using the “X/Y Zoom” function
1 Load the document to be copied.
❍ Refer to “ Loading the Document ” on page 3-9 .
2 Press the [X/Y Zoom] key until the “X/
Y Zoom” indicator lights up.
3 Using the and keys, select the desired zoom ratio for the length (X), and
then press the [Yes] key.
❍ The zoom ratio increases and decreases in 0.01 increments.
❍ Press the [Zoom] key, and then select the desired zoom ratio. Each press of
the [Zoom] key changes the zoom ratio as shown below.
Ч 0.50 → Ч 0.64 → Ч 0.78 → Ч 1.00 → Ч 0.50 . . .
✎
Tip
Press the [No/C] key to return to the main screen. To correct the specified
zoom ratio, press the [No/C] key, and then perform the operation again from
step 2.
Width (Y)
Length
(X)