Konica Minolta bizhub 180 - Manual (Page 68)

3.3 Loading the Document 3
bizhub 180 3-15
B
as
ic
O
per
ati
on
s
Chap
ter
3
To position a book
When copying two facing pages of a bound document, such as a book or magazine,
position it as described below.
1 Lift open the Original cover, or the Document feeder if it is installed.
2 Position the book face down onto the
Original glass, with the top of the book
toward the rear of the machine and
with the center of the book aligned
with the
mark in the Document
scale.
? Have the necessary precautions
been observed when positioning
the book on the Original glass?
➜ Do not place objects weighting
more than 6-1/2 lb on the Original
glass. In addition, do not press
down extremely hard on the
document, otherwise the machine
may be damaged.
3 Carefully close the Original cover, or the Document feeder if it is installed.
4 Press the [Book Separation] key.
The “Book Separation” indicator lights
up.
5 If necessary, specify any other copy settings.
❍ Before Making Copies (p. 5-1)
❍ Advanced Copy Operations (p. 6-1)
6 Press the [Start] key.