Konica Minolta bizhub 180 - Manual (Page 173)

7 7.3 Setting Up the Paper Sources (“PAPER SOURCE SETUP” Menu)
7-16 bizhub 180
U
til
it
y
M
o
de
–
C
opy
F
un
c
ti
ons
Chap
ter
7
7.3 Setting Up the Paper Sources (“PAPER SOURCE
SETUP” Menu)
From the “PAPER SOURCE SETUP” menu, various functions for the paper trays
can be set.
“PAPER SOURCE SETUP” menu:
No. PAPER SOURCE SETUP Description
1 INCH/METRIC This function can be used to set the size measurement system
for the paper loaded in each tray. It can be used to select
whether paper measured in centimeters (“METRIC”), such as
A4 and B5 sizes, or paper measured in inches (“INCH”), such
as Letter size, is loaded. If no particular setting is selected, the
paper size is detected automatically.
• The manufacturer’s default setting is “INCH”.
2 TRAY1 PAPER This function can be used to set the type of paper (“PLAIN”,
“OHP”, “CARD” or “ENVELOPE”) loaded into the 1st tray, and
the size of the paper (“AUTO” or “SIZE INPUT”). If the paper
size is set to “SIZE INPUT”, type in the paper size.
• The manufacturer’s default settings are “PLAIN” and
“AUTO”.
3 PAPER TYPE This function can be used to specify the type of paper loaded
into a tray, which determines whether or not the paper is
available with the Auto Paper function or the tray is available
with the auto tray switching feature. Select the paper type
(“PLAIN”, “RECYCLE” or “SPECIAL”) to specify whether the
paper is available with the Auto Paper function or the tray is
available with the auto tray switching feature.
If special paper is loaded into the tray, “PLAIN”, “RECYCLE”,
“SPECIAL” or “1-SIDE” must be selected.
“PLAIN”: The Auto Paper function can be selected, the auto tray
switching feature is available, and double-sided copies can be
made.
“RECYCLE”: The Auto Paper function cannot be selected;
however, the auto tray switching feature is available, and
double-sided copies can be made.
“SPECIAL”: The Auto Paper function cannot be selected, and
the auto tray switching feature is not available; however,
double-sided copies can be made.
“1-SIDE”: The Auto Paper function can be selected and the auto
tray switching feature is available only when making single-
sided copies. In addition, double-sided copies can be made.
• The manufacturer’s default setting is “PLAIN”.