1 specifying a zoom setting, Specifying a zoom setting -2 – Konica Minolta bizhub 180 User Manual
Page 79
4
4.1 Specifying a Zoom setting
4-2
bizhub 180
Us
efu
l O
pe
ratio
ns
Ch
apte
r 4
4.1
Specifying a Zoom setting
To enlarge/reduce a standard-sized document to a different standard size
As an example, the following procedure describes how to enlarge a Ledger-size
document to a 11
×
17-size document.
1
Position the document(s) to be copied.
❍
Refer to “
2
Press the [Zoom] key.
“LG
→
11
×
17” appears in the display.
✎
Note
With each press of the [Zoom] key,
the preset zoom ratio that is
displayed changes one setting at a
time.
3
Check the setting for the size of paper
to be printed on.
❍
If “AUTO” is displayed, check that
11
×
17-sized paper is loaded into
the paper tray.
❍
If “AUTO” is not displayed, press
the [Paper] key until “AUTO” is displayed.
❍
For details on changing the paper size setting for the paper tray, refer to
“