Konica Minolta bizhub 180 - Manual (Page 203)

7 7.6 Specifying Copy Settings
7-46 bizhub 180
U
til
it
y
M
o
de
–
C
opy
F
un
c
ti
ons
Chap
ter
7
To specify the erased width (“ERASE SETTING” function)
1 Select the “COPY SETTING 1” menu.
❍ Refer to “ To select the “ COPY
SETTING 1 ” menu ” on page 7-39 .
2 Press the [7] key from the 10-Key Pad
to select “ERASE SETTING”.
3 Using the and keys, select
“LEFT”, “UPPER” or “FRAME”, and
then press the [Yes] key.
4 Using the 10-Key Pad, enter the width
of the area to be erased, and then
press the [Yes] key.
❍ The width of the area to be erased
can be set between 3/16 inch
(5 mm) and 13/16 inch (20 mm).
❍ If you wish to correct the setting, press the [No/C] key, and then enter the
new number.
The “COPY SETTING 1” menu appears again.