Konica Minolta bizhub 180 - Manual (Page 46)

2.6 Names of Control Panel Parts and Their Functions 2
bizhub 180 2-17
Pr
ec
au
tio
n
s
Ch
apte
r 2
2.6 Names of Control Panel Parts and Their Functions
Control Panel Parts and Their Functions
No. Part Name Function
1 “Error” indicator Lights up or flashes if an error has occurred.
Refer to “
Error Messages ” on page 8-1 .
2 [Printer] key/indicator Lights up while data is being printed from the computer and
flashes while data is being sent.
For details, refer to the Printer Controller User’s Guide.
3 [Status] key Used to view the counters.
4 [Utility] key Used to enter Utility mode and display the first Utility mode
screen.
• MACHINE SETTING, PAPER SOURCE SETUP, USER
MANAGEMENT,
ADMIN. MANAGEMENT, COPY SETTING 1 & 2
5 Display Displays setting menus, error messages, and specified settings
such as the number of copies and the zoom ratio.
6 [No/C] key Erases the entered numbers and letters.
Returns to the previous screen.
7 [Yes] key Confirms the current setting.
8 [Auto Paper/Auto Size] key Used to select between the Auto Paper or the Auto Size
function.
9 [Zoom] key, and keys • Used to select a preset enlargement or reduction ratio.
• A zoom ratio between × 0.25 and × 4.00 can be selected
when the paper size is selected manually. (Manual paper
selection)
• A zoom ratio between × 0.50 and × 2.00 can be selected
when the paper size is selected automatically. (Auto paper)
• Used to specify the selection above or below in setting
screens and menus.
10 [Paper] key Used to select the size of the paper to be printed on.
5 7 4 6
18
8 10 12 13 14
15
16 17
3 2 1
19
20
9 11