Copying onto manually fed paper, To copy using the manual bypass – Konica Minolta bizhub 180 User Manual
Page 109
5
5.4 Making Copies on Manually Fed Paper
5-16
bizhub 180
Be
for
e M
ak
in
g Co
pie
s
Cha
p
ter 5
Copying Onto Manually Fed Paper
To copy using the Manual bypass
1
Load the document to be copied.
❍
Refer to “
2
Adjust the paper guides to fit the size
of the paper.
3
Insert one sheet of paper with the front
side facing down, lightly sliding the
paper as much as possible into the
feed slot.
The manual bypass mark (
)
appears in the bottom line of the
screen.
?
Is a card or a postcard loaded?
➜
Make sure that it is not curled
(rolled).
4
Press the [No/C] key.
The “PAPER SOURCE SETUP” menu appears.
5
Use the
and
keys to select
the type of paper loaded.
❍
Select from the following four
paper type settings.
“PLAIN”
“OHP”
“CARD”
“ENVELOPE”
6
Press the [Yes] key.
The “PAPER SIZE” menu appears.