Konica Minolta bizhub 180 - Manual (Page 177)

7 7.3 Setting Up the Paper Sources (“PAPER SOURCE SETUP” Menu)
7-20 bizhub 180
U
til
it
y
M
o
de
–
C
opy
F
un
c
ti
ons
Chap
ter
7
✎
Note
The paper length is set between
16-9/16 inch (421 mm) and 17 inch
(432 mm), the maximum width that
can be set is 11 inch (279 mm).
The paper width is set between
11 inch (280 mm) and 11-11/16
inch (297 mm), the maximum
length that can be set is 16-9/16
inch (420 mm).
? Have the necessary precautions been observed when entering the paper
size?
➜ Refer to the diagram at the right
and be sure to specify the paper
width and length measurements
correctly.
6 Using the 10-Key Pad, enter the paper
width (mm).
❍ The paper width can be set
between 3-9/16 inch (90 mm) and
11-11/16 inch (297 mm).
❍ If you wish to correct the setting,
press the [No/C] key, and then enter the new number.
7 Press the [Yes] key.
The “PAPER SOURCE SETUP” menu appears again.
16-9/16 inch to 17 inch
Less
t
han 11
inch
(W
idt
h
)
(Length)
Less than 16-9/16 inch
11
in
c
h
t
o
1
1
-11/
16
inch
(Wi
d
th
)
(Length)
Width (y)
Length (x)