Konica Minolta bizhub 180 - Manual (Page 230)

8.4 Main Error Messages and Their Remedies 8
bizhub 180 8-19
Er
ro
r Me
ss
ag
es
Ch
apte
r 8
SET ORIGINAL TO ADF A document was not loaded into
the Document feeder before
beginning a copy function (such
as, “2in1” copying or “Mixed Orig.”
copying) that uses the Document
feeder. Otherwise, the Document
feeder is lifted up. Load a document into the Document
feeder.
Securely close the Document
feeder.
REMOVE PAPER When interrupting a copy job to
perform a different copy operation
other than the “Book Separation”
function, the document for the
interrupted copy job was left in the
Document feeder. Remove the document from the
Document feeder.
TEXT/P
Ч
1.00
д [A] ü #XXX:EMPTY
(While specifying Copy settings)
The selected paper tray has run
out of paper.
“#” indicates the paper tray, and
“XXX” indicates the paper size. Either load paper of the specified
size into the specified paper tray, or
press the [Paper] key and select a
different paper size.
NO SUITABLE PAPER • While copying, the size of the
paper in the selected paper tray
has changed.
• While copying documents with
mixed sizes using the Auto
Paper function, paper of a
suitable size could not be
found.
“#” indicates the paper tray, and
“XXX” indicates the paper size.
Either load paper of the specified
size, or press the [Paper] key and
select a different paper size.
(Flashing alternately)
LOAD PAPER (#XXX)
APS SIZE ERROR While copying using the Auto
Paper function, paper of a suitable
size could not be found. Either load paper of a suitable size,
or press the [Paper] key and select a
different paper size.
AMS SIZE ERROR While copying using the Auto Size
function, the combination of the
document and paper sizes caused
the zoom ratio to exceed the range
between
×
0.5 and
×
2.0.
Either load paper of a suitable size,
or use the
and keys to
specify the zoom ratio.
PAPER SIZE ERROR The paper loaded in the paper tray
caused a size error.
“#” indicates the paper tray, and
“XXX” indicates the paper size. • For a Paper feed unit, remove the
loaded paper, and then reload the
paper according to the procedure
described in “
Loading Paper ” on
page 3-4 .
• For a custom paper size, refer to
“ To copy onto label sheets ” on
page 4-8 .
• For the Manual bypass, remove
the loaded paper, and then refer
to “
To copy onto label sheets ” on
page 4-8 . For the Manual bypass,
remove the loaded paper, and
then reload the paper according
to the procedure described in
“
Copying Onto Manually Fed
Paper ” on page 5-16 .
• For a custom paper size, refer to
“ To copy onto postcards ” on
page 4-14 .
(Flashing alternately)
RESET PAPER (#XXX)
Message Cause Remedy