Konica Minolta PagePro 1390 MF - Manual (Page 101)

S-25
4-3. Tx Report
• TX report is printed automatically after each transmission (No manual print).
User can select whether or not a report is printed after a transmission in Fax Setup.
☞ S-17
(1) Transmit Report
• Transmit Report includes following information.
A. TIME : Shows the time that the transmission report was printed.
B. NAME : Shows the name specified in Fax Setup for the machine.
C. FAX : Shows the fax number specified in Fax Setup for the machine.
D. Date,Time : Shows the date and time that the transmission began.
E. Identification : Shows the recipient name or fax number.
Shows the recipient name if one-touch dial keys or speed dial numbers
were used in the transmission. Shows the fax number if the number
was entered directly or if one-touch dial keys or speed dial numbers
with no recipient name registered were used.
F. Duration : Shows the length of time of the transmission.
G. Page(s) : Shows the total number of pages transmitted.
H. Mode : ECM/Resolution/Coding/Speed (Only when “Speed display” is ON).
If error happen during negotiation, this field may be blank.
I. Result : Shows the transmission results and error codes.
J. Image : Reduced 1st page image is printed.
☞ For definition of Fax error code, refer to T-37.
<Sample of the Transmit Report>
4558F3C607DA
1st page image
PagePro 1390MF Transmit Report