Konica Minolta PagePro 1390 MF - Manual (Page 35)

E-3
2. REPLACEMENT/CLEANING OF PARTS
(1) Cleaning the Paper Take-Up Roller
1. Lift up the Exit Tray and remove it.
2. Open the Front Door.
3. Remove the Imaging Cartridge.
☞ E-5
NOTE
• The Imaging Cartridge consists of the Drum Cartridge, to which the Toner Cartridge is
mounted.
5. Close the Front Door.
6. Reinstall the Exit Tray.
(2) Replacing the Paper Take-Up Roller
1. Lift up the Exit Tray and remove it.
2. Open the Front Door.
3. Remove the Imaging Cartridge.
☞ E-5
5. Insert a new Paper Take-Up Roller.
6. Reinstall the Imaging Cartridge.
7. Close the Front Door.
8. Reinstall the Exit Tray.
4. Using a soft cloth, wipe the surface of the Paper
Take-Up Roller clean of dirt.
4980E006AA
4. Remove the Paper Take-Up Roller.
4980E007AA