3) local mechanical error/resource error, 4) dial failure, 5) tx comm. error – Konica Minolta PagePro 1390 MF User Manual
Page 148: 6) rx comm. error, 7) compatibility error, T-38
T-38
(3)
Local mechanical error/resource error
This error can be recovered by operator.
• ADF JAM for Manual TX
• ADF Cover Open during manual TX
• Power off during TX
• RX Memory Full
ADF JAM for memory TX happens before dialing and not logged in activity report.
RX paper JAM/Cover open activate memory RX and not logged in activity report.
(4)
Dial failure
Operator should confirm TEL line connection and remote fax number. If these are correct,
these error can be recovered by redial (resend).
• No Connection (when DT detect is ON)
• Redial All Fail
(5)
TX Comm. Error
This error might be caused by bad TEL line. This can be recovered by redial/resend. If not
some setting adjustment in Fax Maintenance might be needed. Error code must give
enough information which includes modem speed/Mode etc.
(6)
RX Comm. Error
This error might be caused by bad TEL line. It is up to TX operator’s action but operator
might be prompted to inform TX operator that RX was not successfully completed. Error
code must give enough information which includes modem speed/Mode etc.
(7)
Compatibility Error
This is compatibility error which needs remote operator’s action Polling RX and remote
machine is not capable to be polled.