Konica Minolta PagePro 1390 MF - Manual (Page 66)

D-24
(3) Removing the Paper Take-Up Solenoid (SL1)
1. Remove the Left Cover.
☞ D-2
Precautions for Installation of the Paper Take-Up Solenoid
1. Mount the Paper Take-Up Solenoid and tighten one screw.
2. Turn the gear in the direction of the arrow shown below so that the flapper of the Paper
Take-Up Solenoid catches the stopper of the gear.
7. Disconnect one connector and remove the Tray 1
Paper Empty Sensor.
4136D014AA
2. Disconnect one connector of the Paper Take-Up
Solenoid.
4558FS2505DA
3. Remove one screw.
4. Remove the Paper Take-Up Solenoid.
4558FS2506DA
Flapper
Gear
4980D067AA
Stopper