11) printer system: low image density, T-33 – Konica Minolta PagePro 1390 MF User Manual
Page 143
Advertising
T-33
(11) Printer system: Low image density
<Typical Faulty Image>
<Troubleshooting Procedure>
Step
Check
Result
Action
1
Is the paper damp?
YES
Replace the paper with paper
that was just unwrapped.
2
Is there toner left in the Toner Cartridge?
NO
Replace the Toner Cartridge.
3
Is the PC Drum faulty (life)?
YES
Replace the Drum Cartridge.
4
Is the developing bias faulty?
YES
Replace the High Voltage Unit
(HV1).
Replace the Controller/Image
Control Board (PWB-I).
5
Is the image transfer faulty?
YES
Replace the Image Transfer
Roller.
Replace the High Voltage Unit
(HV1).
Replace the Controller/Image
Control Board (PWB-I).
4011T003AA
Advertising