Konica Minolta PagePro 1390 MF - Manual (Page 70)

D-28
(6) Disassembling the Fusing Unit
NOTE
• The Fusing Unit is extremely hot immediately after the Power Switch has been turned
OFF. Allow a sufficient time to let it cool down before starting the procedure to prevent
burn.
1. Remove the Fusing Unit.
☞ E-8
1. When the Roller is leaning in the clockwise direc-
tion, move the coupling Gear in the A direction.
4136D046AA
2. When the Roller is leaning in the counter clock-
wise direction, move the coupling Gear in the B
direction.
4136D045AA
2. Remove the two screws.
3. Remove the Fusing Unit is divided into the Upper
Fusing Roller section and Lower Fusing Roller
section.
4136D021AA
Upper Fusing
Roller section
Lower Fusing
Roller section
4. Remove two bushings and the Pressure Roller.
4136D022AA
Lower Fusing
Roller section