Liebherr BF1051 - Manual (Page 35)

S
IDE
-B
Y
-S
IDE
I
NSTALLATION
33 BFI/BF1051 / BGEN/es 2956
Built-in appliances with a wooden ventilation
grille:
2. Figure 34: Cut out the wooden trim for use as
a ventilation grille using the attached template.
- The required ventilation cross-section must
be at least 62 square inches (400 cm 2 ) for
side-by-side installation of two appliances,
which corresponds to the attached template
“double-size.”
Figure 34
2
X
5
48"
(1219,2 mm)
1/2"
(13 mm)
3-11/16"
(93,7 mm)
LBR044
A delight in freshness
- Remove the attachment brackets from the
installation frame (2) and screw them to the
appliance from underneath.
- Place the wooden ventilation grille (5) on the
appliance, align it in the center and secure it
from the rear using the attachment brackets.
BGEN_7082248_0929_Install_3Lang.qxd 10/21/2004 7:56 AM Page 33