Lanier 5415MFD - Manual (Page 111)

Setting of RX Operations
Enhanced Utilities 6 - 15
Setting of RX Operations
Memory RX Mode
Memory RX Mode stores in memory the contents of a document received. The document is not
printed unless the machine receives a print out command. This feature provides a means of
controlling the documents received through fax. The print command may be a timer or password.
The print timer command causes the machine to start printing the document stored in memory
when the specified time arrives. The password print command, on the other hand, causes the
machine to start printing when a password is entered.
A print timer command can be used in combination with a password print command. When a print
timer command has previously been defined and if you want a printout before the set time, you can
enter the password to let the machine print the document earlier than the set time if a password
print command has also been set.
Programming for Memory RX Mode
1
Press the "Program" key 5 times.
The display changes to the RX OPERATION.
2
Press ‘1’ of the keypad.
The display now changes to the Memory RX Mode.
3
Press the "Left" or "Right Arrow" keys to select the memory reception mode ON.
4
Check that ON is selected and then press the "Yes" key.
5
Setting print timer.
•
Using the Keypad, enter the on time (24-hour system) at which you want to receive into
memory. For example: 3:05 p.m.
Note: If you do not want to set the print timer, press the "Yes" key, then the
Memory RX mode is always on.
•
To change the on time, press the "No/Clear" key. Then, the display prompts you to enter
the on time.
6
Using the keypad, enter the OFF time (24-hour system) at which you want a printout.
•
Press the "Yes" key.
•
To change the off time, press the "No/Clear" key. Then, the display prompts you to enter
the OFF time.
7
Setting the password.
•
Using the Keypad, enter the password for Memory RX printout.