Copy setting, Setting density/photo, Setting auto density – Lanier 5415MFD User Manual
Page 124: Setting manual density, Copy setting -8, Setting density/photo -8 setting auto density -8, Setting manual density -8
Copy Setting
7 - 8
Enhanced Programming
Copy Setting
This section describes the choice available in COPY SETTING menu.
Setting DENSITY/PHOTO
1
Press the "Program" key 2 times, then the message COPY SETTING appears.
2
Press "1" of Keypad. A message appears briefly to confirm your selection.
3
Press the Arrow keys to select AUTO, MANUAL or PHOTO as default setting and
press "Yes" key.
4
Press "No/Clear" key, back to the initial state.
Setting AUTO DENSITY
Set density level of Automatic density adjustment.
1
Press the "Program" key 2 times, then the message COPY SETTING appears.
2
Press "2" of Keypad. A message appears briefly to confirm your selection.
3
Press the "Left" or "Right Arrow" keys to select the desired density as default
setting and press "Yes" key.
4
Press "No/Clear" key, back to the initial state.
Setting MANUAL DENSITY
Set initial value of manual density level.
1
Press the "Program" key 2 times to display the message COPY SETTING.
2
Press "3" of Keypad. The message “3 MANUAL DENSITY” is displayed briefly to
confirm your selection.
3
Press the Arrow keys to select the desired density as default setting and press "Yes"
key.
4
Press "No/Clear" key, to return to the initial state.