Lanier 5415MFD - Manual (Page 45)

2 in 1 Function
Making Copies 2 - 9
2 in 1 Function
The 2 in1 function copies two images onto one side of one sheet of paper.
Note: Initial setting value can be changed in 2 in 1 priority of Program function.
Refer to “Setting 2in1 MODE” on page 7-9.
Using the ADF
1
Turn the 2 in1 function ON by pressing the 2 in 1 key
•
The 2 in1 indicator lights up
•
Copy ratio automatically changes to 67%
2
Place the original documents in the ADF.
3
Press the "Start" key to perform the 2 in1 copy.
Using the Exposure Glass
1
Turn the 2 in 1 function ON by pressing the 2 in 1 key
•
The 2 in 1 indicator lights up
•
Copy ratio automatically changes to 67%
2
Align the rear left corner of the first page original document with the scale marker
3
Press the "Start" key to copy this document.
4
Remove the first document and place the second page on the Exposure Glass, aligning it
with the scale markers.
5
Press the "Start" key to copy this document.
6
The 2 in 1 page is then printed.
7
For more pages, repeat the procedure from step 2 to 4.
Note: If you have a document with odd pages, after copying the last page, you
must copy another page to print the last 2 in 1 page.