Lanier 5415MFD - Manual (Page 32)

Connecting to a Private Branch Exchange (PBX)
1 - 22 About the Machine
Connecting to a Private Branch Exchange (PBX)
When dialing an outside number via a PBX, it may take some time to be connected to the
outside line after dialing out.
In such a case, if you enter the numbers consecutively, a connection may not be achieved
after dialing (Dial Error).
To avoid such an error, enter a pause command at the beginning of the telephone number
after entering the number for accessing the outside line.
By entering a pause, you can avoid the dial error caused by the PBX system.
The number you dial to access the outside line differs for different PBX systems.
How to Operate
1
Enter the access number used by your PBX.
2
Press the "Redial/Pause key after ‘0’ wait about 2.5 seconds to connect to the PSTN
line.
3
Use the Keypad to input the number you want to dial.
•
If you have entered the wrong number, press the "Arrow" key.
•
The cursor position moves back one position.
•
Enter the correct number again.
4
Press "Start" key to perform the transmitting.