Lanier 5415MFD - Manual (Page 89)

Polling TX
Function Utilities 5 - 15
Polling TX
Polling TX allows you to set a document to be retrieved by a remote fax machine. Your machine
automatically sends the stored document in response to polling requests from remote devices. You
can set a 4-digit password to distinguish polling document.
Polling TX offers Single and Multi Modes:
•
You can set a 4-digit ID to distinguish polling document. Contact your Key Operator to
have this set up for you.
•
It does not matter if network is set to ON or OFF, your document can be polled by
remote fax machine with correct polling password.
Using Polling TX
1
Place the original document into the Document Feeding Tray.
2
Press the "Function" key.
3
Press ‘5’ of Keypad to select the "POLLING TX ".
A message appears briefly to confirm your selection.
4
Enter the 4-digit Polling ID if you need.
For example: 1234
5
Press "Yes" key.
6
Press the “Left” or “Right Arrow” keys to select “SINGLE” or “MULTI”.
7
Press "Yes" key to start the Polling session.
•
Your document is scanned into memory, where it is ready to be polled.
•
The ‘P‘ in the Message Display indicates that the Polling Document is in
memory.
Single Mode The specified file is deleted after it has been transmitted
Multi Mode The specified file could transmit several times to those who
need this file, until you cancel this Reservation Session.