Lanier 5415MFD - Manual (Page 12)

Power ON & OFF
1 - 2 About the Machine
Turning the Power OFF
1
Check that the memory volume display on the Message Display shows 100%.
If the percentage shown is less than 100%, it means there are documents stored in memory
which have not been transmitted. In this case, perform the following steps to retain these
documents.
When the memory contains a document to be transmitted:
Output the Memory Image Print, and retransmit at another time.
When the memory contains a document received:
Let the machine print the document received according to the specific procedure as
follows.
•
Printing the Document Received by Memory RX mode.
•
Printing the Mailbox Document.
2
Turn the "Power Switch" to " ϒϒϒϒ" (OFF) position.