Lanier 5415MFD - Manual (Page 46)

Sort Function
2 - 10 Making Copies
Sort Function
When using the Sort function, multiple copies are copied in sets and in sequential order.
.
Note: Installation of the Automatic Document Feeder and expansion memory is
required for this function.
Sort mode and Non-Sort mode can be switched by pressing the”Sort” key. When Sort mode is
selected the Sort indicator lights up. The default setting is Sort mode. This setting is effective untill
the Panel Reset is performed.
1
Place the original document in the ADF.
2
Turn ON Sort function by pressing the “Sort” key
•
The Sort indicator lights up.
3
Press the "Start" key.
•
Copies are assembled as sets in sequential order.