Paxar 9800 Series - Manual (Page 33)

Novell Network Configuration 5-5
C o n f i g u r i n g t h e P r i n t S e r v e r a n d P r i n t Q u e u e w i t h H P
J e t A d m i n 3 . X X ( Q u e u e S e r v e r M o d e )
NOTE: JetAdmin 1.xx and 2.xx do not allow direct configuration of NetWare print
queues. If you are using these versions, you may configure the print
server with JetAdmin and then use NWAdmin or PCONSOLE to add the
print queue. If possible, upgrade to JetAdmin 3.xx (available on the HP
web site at http://www.hp.com).
1. Make sure that JetAdmin 3.xx is running on your system and that you have
sufficient privileges to use it to create print queues. If you are using the
Microsoft NetWare client on your workstation, make sure that you have
installed Services for NetWare Directory Services in the Network control
panel.
2. Run HP JetAdmin.
3. One or more print server NetWare services will show up in the list of printers
(the default service names are listed in the Default Print Server Names section
at the beginning of this chapter). Single click on the one that you wish to
configure and then go the menu bar, select File and then Modify.
4. If desired, change the print server name and description. Click Next. Do this
with caution because this will change the print server service name, and will
therefore affect any other protocols that use this service.
5. Make sure that NetWare Directory Services is selected in the window on the
left side of the display.
♦
Click on the t button and select the NDS tree.
♦
Click Change... button to select the NDS context.
6. Click on the Operating Mode button and select Queue Server Mode.
7. Click on the Queues button and then click on the Change... button. Two
windows will appear, Available Print Queues and Serviced Print Queues. Go
to the Available Print Queues window:
♦
If you are configuring an NDS queue, click on the context where the
print queue will reside.
♦
If you are configuring a bindery queue, click on the volume where the
queue will reside.
8. Click on Create and enter any unique name for the Queue name.