Paxar 9800 Series - Manual (Page 36)

5-8 Novell Network Configuration
♦ Enter any desired name for the printer and select Create.
3. Create a print queue object:
♦ Click on the container where the object will reside. Select Object
from the menu bar and then Create.
♦ When you get the New Object menu, select Print Queue and then
OK.
♦
Enter any desired name for the print queue
♦ Click on the Print Queue Volume button and select the volume on
which the print queue will reside.
♦
Press OK and then Create.
4. Create a print server object:
♦
Click on the container where the object will reside.
♦
Select Object from the menu bar and then Create.
♦ When you get the New Object menu, select Print Server and then
OK.
♦
Enter the name of the print server and select Create. Use the default
print server name (the default names are listed in the Default Print
Server Names section at the beginning of this chapter) unless you
specifically changed it with XAdmin32, Admin, JetAdmin, or the print
server console.
5. Associate the printer with the print queue:
♦
Change context if required and then double click on the name of the
printer you created in step 3.
♦ Click on Assignments and then Add...
♦
Change context if necessary and select the print queue you created
in step 4. Click OK and then OK again
6. Associate the print server with the printer:
♦ Change context if required and then double click on the name of the
print server you created in step 5.
♦ Click on Assignments and then Add...
♦ Change context if necessary and select the printer you created in
step 3. Click OK and then OK again.