Paxar 9800 Series - Manual (Page 48)

6-4 Windows NT/LAN/WARP Server Network Configuration
1. Go to the Main window and elect Print Manager icon.
2. Select Printer menu.
3. Select Create Printer
4. Enter any name for the printer for the Printer Name.
5. Select Driver. Choose appropriate driver.
6. Select Description. Enter anything.
7. Select Print to.
8. Select Other.
9. Select LPR Port.
10. Enter the print server IP address or name (from H O S T S file) as the Name or
Address of Host Providing LPD.
11. Enter the print server service name (BINARY_P1) as the Name of Printer on
That Machine.
L A N S e r v e r / W a r p S e r v e r C o n f i g u r a t i o n
Monarch print servers will work with IBM LAN Server/Warp Server networks that
have IBM TCP/IP V2.0 or later software installed on the file server (TCP/IP is
standard with LAN Server V4.0 and later, and on Warp Server). Use the following
procedure to configure the print server on an OS/2 LAN Server or Warp Server file
server, or on a OS/2 Warp

Connect workstation:
1. Make sure that TCP/IP software is installed on your OS/2 file server. If you
have not already done so, open the TCP/IP folder on the desktop, and double
click on the TCP/IP Configuration icon to add the IP address to the OS/2 file
server (consult your system manager for this address).
2. Add the print server name to the H O S T S file (usually located in the \ t c p i p \ e t c
directory; this step is not required if you use the print server IP address as the
name). To do this, go to the OS/2 System icon, open the Command Prompts
folder, and double click on the OS/2 Window icon. Use the OS/2 editor and
add the an entry similar to the following:
1 9 2 . 1 8 9 . 2 0 7 . 7 7 x p s
Substitute the name of the print server (any unique name will do) and the
desired IP address in place of
x p s and 1 9 2 . 1 8 9 . 2 0 7 . 7 7 in the above example.