Paxar 9800 Series - Manual (Page 58)

9-2 DLC/LLC Configuration
6. Type in any desired name for the port (the name must not be the name of an
existing port or DOS device, such as LPT1) and click OK and Close.
7. The Printer Ports menu will appear. The name you selected in step 6 will
appear as a checked port in the list of available ports. Click Next.
8. Select the desired printer manufacturer and model and click Next.
9. Give a name to the printer. If desired, select the printer as the default.
10. Select Shared or Not Shared. If shared, select the type of operating systems
that will be printing to it.
11. Select whether or not you want a test page, and then select Finish.
12. You will need to reboot your system in order to make the change take effect.
Windows NT 3.xx Printer Setup
1. From the Windows NT Main group, double click on the Print Manager icon.
2. Select Printer from the menu bar and click on Create Printer.
3. Enter any desired name for the printer in the Printer Name box.
4. Select the printer model in the Driver menu.
5. Choose Other (or Network Printer for V3.1 systems) from the Print to menu.
6. Click on Hewlett-Packard Network Port.
7. Type in your desired name for the port (this name must not be an existing port
or DOS device, such as LPT1).
8. The Ethernet addresses of available print servers will appear in the Card
Address menu. Select the desired address (the address is on the label affixed
to the print server, or it can be gotten through the self-test page) and then click
OK.
9. If you want to share the printer, click Share the Printer on the Network.
10. Click OK
11. If necessary, select the appropriate printer options and then click OK.