Paxar 9800 Series - Manual (Page 56)

8-2 Microsoft Network Configuration
♦ With WebXAdmin, click on NetBIOS and then enter the desired domain name.
♦
With the print server console, enter the command:
SET NETB DOMAIN domainname
,
where domainname is the desired domain name.
L A N S E R V E R / W A R P S E R V E R C O N F I G U R A T I O N
OS/2 File Server Configuration:
1. Open the Templates folder on the OS/2 desktop.
2. Using the right mouse button, drag the Printer template onto the desktop.
3. Type in any desired name for the printer from the Create a Printer window.
4. Choose an unused port (for example, LPT3) to connect to the printer.
5. Choose the appropriate printer driver from the list.
6. Click Create and then OK.
7. If desired, indicate whether you want to share the printer.
OS/2 Workstation Configuration:
On each workstation that you wish to print from, execute the following step:
Go to the DOS or OS/2 command prompt and enter the command:
NET USE LPTx: \ \ servername\servicename
where “x” is the LPT port number (1 through 9), servername is the print server
name (XCD_xxxxxx) by default, where “xxxxxx” is the last six digits of Ethernet
address and servicename is the service name, (BINARY_P1)
NET USE LPT2: \\XCD_002477\BINARY_P1