Paxar 9800 Series - Manual (Page 39)

Novell Network Configuration 5-11
5. Double click on the name of your PSERVER NLM. Click on Assignments and
then Add...
6. If necessary, change the directory context. Select the printer you created and
click OK. Note the number of the printer, then click OK.
7. Select the desired Container Object (Organizational Unit) that will contain the
default print queue, and then click on Object and Create to get New Object
menu.
8. Select Print Queue and then OK. Make sure that Directory Service Queue is
selected, and then type in a name for the default print queue.
9. Click on the button to select the print queue volume. Change the directory
context if necessary, then select the desired volume (Objects) and click OK.
Click Create to create the print queue.
10. Change context if required and then double click the name of the printer you
created previously.
11. Click Assignments and then Add..
12. Change context if necessary and select the print queue you created. Click OK
and then OK again, and then exit NWADMIN.
13. Select the print server and service that you wish to configure:
♦ If you have XAdmin32, double click on the print server name and then
click on the NetWare tab.
♦ If you are using XAdmin, one or more print server NetWare services
will show up in the list of printers (the default service names are
listed in the Default Print Server Names section at the beginning of
this chapter). Double click on the one that you wish to configure and
then click on the NetWare tab.
♦ If you are using WebXAdmin, start your web browser, enter the IP
address of the print server as the destination address, and then push
ENTER or RETURN. Click on Configure NetWare, and then click on
the Enabled Service that you wish to configure (the default service
names are listed in the Default Print Server Names section at the
beginning of this chapter).