Paxar 9800 Series - Manual (Page 59)

DLC/LLC Configuration 9-3
C o n f i g u r i n g D L C / L L C o n O t h e r S y s t e m s
To use DLC/LLC on other network systems, you will generally need vendor supplied
software. Typically such software is designed to support the HP JetDirect print
server. Follow the vendor's instructions to install the DLC protocol on your system.
Once the protocol is installed, you create a network port in a manner similar to the
Windows NT procedure described in the previous sections. The Ethernet address
of the print server should automatically appear during the configuration process.
The final step is to create a printer using the normal operating system printer setup
method. The only difference is that instead of connecting the printer to the LPT1
parallel port, you point it to the network port you just created.