Panasonic AG-HPX500E - Manual (Page 102)

102
Connecting the AJ-RC10G Extension Controller
C
h
ap
te
r 5 P
re
p
ar
at
io
n
Connecting the AJ-RC10G Extension
Controller
• Some functions can be remote-controlled when
the AJ-RC10G extension control unit (optional) is
connected to the camera.
• When the AJ-RC10G is connected, the camera
automatically enters remote control mode after the
power switches of both the camera and the AJ-
RC10G are turned ON.
<Note>
• Be sure to turn OFF both the camera and the AJ-RC10G
power switches before connecting or disconnecting
the controller cable.
• If RC DATA SAVE (AJ-RC10G) is set to OFF, the
camera-related setting values, which have been
adjusted or set using the AJ-RC10G, will be cancelled
when the camera power switch is turned OFF. Also,
the setting values cannot be written to an SD memory
card. However, the menu settings performed using the
AJ-RC10G can be written to an SD memory card. Next
time the AJ-RC10G is connected, the setting values will
return to the AJ-RC10G settings.
• If RC DATA SAVE (AJ-RC10G) is set to ON, the values
adjusted or set using the AJ-RC10G are retained, even
after the camera power switch is turned OFF.
• The USER switch on the camera does not function
when the AJ-RC10G is connected.
• Refer to the Operating Instructions of the AJ-RC10G
incuded in the supplied CD-ROM.
AJ-RC10G
REMOTE connector