Panasonic AG-HPX500E - Manual (Page 84)

84
Power Supply
C
h
ap
te
r 5 P
re
p
ar
at
io
n
Chapter
5
Preparation
Power Supply
A battery pack or an external DC power supply can be
used as the power supply for the camera-recorder.
Using a Battery Pack
Battery packs from the following manufacturers can be
used:
• Anton/Bauer
• IDX
• PACO
• Sony
<Notes>
• Other batteries may be used by changing the menu
setting, but system compatibility is not guaranteed.
• Charge the battery pack with the battery charger
before using it. (Please refer to the battery charger’s
instruction manual for information about charging.)
Mounting the Battery and
Setting the Battery Type
Using an Anton/Bauer Battery Pack
1
Mount an Anton/Bauer battery pack.
<Note>
The Anton/Bauer battery holder includes both a
power supply output connector for lighting and
a lighting control switch, which are convenient
when attaching a light. Please contact Anton/
Bauer for information about the lighting system.
Lighting control switch
Anton/Bauer
Battery Pack
Power supply output
connector for lighting