Panasonic AG-HPX500E - Manual (Page 72)

72
Viewfinder Screen Status Displays
C
h
ap
te
r 4 A
d
ju
st
m
en
ts a
n
d S
et
tin
g
s f
o
r R
ec
o
rd
in
g
Errors
These are displayed when an error occurs in the unit,
P2 card, tape, or other component. If the problem is
not fixed by turning the power off and then on again,
either replace the card or tape based on the error
information, or consult with your dealer as to which
one is to be purchased.
• CANNOT REC
This is displayed during a recording error.
• CANNOT PLAY
This is displayed when trouble has occurred during
playback.
• CARD ERR (1) (2) (3) (4) (1/2/3/4):
Trouble has occurred in the P2 card found in the slot
indicated by the number.
• CLIP ERROR: clip trouble
• UPDATING: Reading card data
• ERROR: other type of trouble
• SYSTEM ERROR
This is displayed when trouble has occurred in the
system. Switch ON the power again.
• P2 MICON ERROR: No P2 microcomputer response
• P2 CONTROL ERROR: Trouble in P2 control
• REC RAM OVERFLOW: Recording RAM overflow
• TURN POWER OFF
This message indicates that an abnormal event has
occurred, for example, that a card has been removed
during access or that a change in system frequency
has been made. Turn the power off and then turn it
back on again.
• REC WARNING
This is displayed when trouble has occurred during
recording. Carry out recording once again. If the
warning persists, consult your dealer.
• CARD ERR (1) (2) (3) (4) (1/2/3/4):
Trouble has occurred in the P2 card found in the slot
indicated by the number.
● If the warning continues, turn off the power.
● If the warning appears even when recording is
carried out again, replace the card with another
one.
• ERROR: Other type of trouble
• 1394
This is displayed when trouble has occurred in the
1394 connections or signals.
• 1394 INITIAL ERROR: Connection error
• 1394 INPUT ERROR: Input error
• 1394 INPUT ERROR (OTHER FORMAT):
(Wrong input format)
• LOW BATTERY:
Indicates that the battery is exhausted.
Camera status display
• AWB: AWB indicator
• ABB: ABB indicator
• AWB P3.2 K/AWB P5.6K: Displays the color
temperature assigned to PRST when the WHITE BAL
switch is set to PRST. Also displayed when AWB is
performed in the PRST position.
• GAIN **dB: Displayed when GAIN is switched.
• BACK LIGHT (OFF): Displayed during iris control
when back light status is changed by pressing the
user button to which BACK LIGHT is assigned.
• SPOT LIGHT (OFF): Displayed during iris control
when back light status is changed by pressing the
user button to which SPOT LIGHT is assigned.
• SHUTTER 1/**** (OFF): Displayed when the shutter
speed is changed.
• SCENE ******: Displays the name of a scene file
selected by turning the SCENE FILE dial.
• ND NG: Displayed when the ND filter is not working
normally.
• AUTO KNEE (ON/OFF): Displayed when changing
the AUTO KNEE switch position.
USER buttons assignment
information (at mode check)
Displays the function assigned to each USER button.
For details, see [Assigning Functions to USER
buttons] (page 55).
! LED light indication
(at mode check)
Indicates why an ! LED is lit according to setting menu
VF! LED screen settings.
•
GAIN: Indicates the camera is using a gain value
other than 0 dB.
• AWB: Indicates that the WHITE BAL switch is set to
PRST.
• SHUT: Indicates the electronic shutter is operating.
• FILT: Appears when the filter set by menu is met.
• EXT: Indicates when the lens extender is inserted.