Panasonic AG-HPX500E - Manual (Page 91)

91
Mounting and Adjusting the Lens
C
h
ap
te
r 5 P
re
p
ar
at
io
n
Mounting and Adjusting the Lens
Mounting the Lens
1
Raise the lens clamping lever and
remove the mount cap.
2
To mount the lens, align the indentation
at the top center of the lens mount with
the center mark of the lens.
3
Lower the lens clamping lever to clamp
the lens.
4
Secure the cable through the cable
clamp, and plug it into the LENS
connector.
5
Adjust the lens flange back.
<Notes>
• Please refer to the lens instruction manual for
guidance on lens handling.
• When the lens is removed, install the mount
cap to protect the device.
LENS Connector
Mark
Mount Cap Lens Clamping Lever