Panasonic AG-HPX500E - Manual (Page 66)

66
Setting Time Data
C
h
ap
te
r 4 A
d
ju
st
m
en
ts a
n
d S
et
tin
g
s f
o
r R
ec
o
rd
in
g
GENLOCK and time code input/output connection and
setup
Camera operating conditions Camera setup
GENLOCK input and camera output
phase (In phase: ❍ Out of phase: ×)
Recording
format
Video and reference
signal to be output
externally
GENLOCK
input
GL SELECT GL PHASE SDI OUT
VIDEO
OUT
TC OUT
Connection
diagram
1080i
SDI OUT (1080i)
1080i
SDI Disabled ❍ × ❍
(1)
VIDEO OUT COMPOSITE
OFF × ❍ ❍
ON ×
▲
90H delay
▲
90H delay
—
SDI OUT (1080i)
SD (480i, 576i)
SDI
OFF ❍ × ❍ (1)
ON
▲
90H
advance
×
▲
90H
advance
(2)
VIDEO OUT COMPOSITE Disabled × ❍ ❍ (1)
720P
SDI OUT (720P)
SD (480i, 576i)
SDI
OFF ❍ × ❍ (1)
ON
▲
120H
advance
×
▲
120H
advance
(2)
VIDEO OUT COMPOSITE Disabled × ❍ ❍ (1)
480i, 576i
SDI OUT (480i, 576i)
SD (480i, 576i)
SDI Disabled ❍ × ❍
(1)
VIDEO OUT COMPOSITE Disabled × ❍ ❍
■ Connection diagram (1)
VTR, etc.
TC OUT
REF
SDI or
VIDEO OUT
AG-HPX500P/E
TC
HD signal
or
SD signal
TC IN
GENLOCK
■ Connection diagram (2)
Down-conversion
SD device
REF
TC
COMPOSITE
SDI
AG-HPX500P/E
TC
SD signal
(Delay)
TC IN
GENLOCK
Counter Setting and Display
Pressing the COUNTER button to view the counter
displays the counter value on the time code indicator
in the LCD and in the viewfinder. The counter value is
indicated in “Hour : Minute : Second” format.
The counter can display the total recording time but is
not displayed during playback.
The recording CTL counter value is retained also when
P2 cards are replaced and after a power down. At next
power up, the counter starts from the value reached at
the previous power down.
<Note>
• Pressing the RESET button when the counter value is
displayed resets the counter to 0.
• The counter value indicates values in the range
between 0:00:00 and 9:59:59 at 1-second step.