Contents of p2 card status display settings – Panasonic AG-HPX500E User Manual
Page 114
114
Properties
C
h
ap
te
r 6 M
an
ip
u
la
tin
g C
lip
s w
ith T
h
u
m
b
n
ail
s
Contents of P2 Card Status Display
Settings
Select PROPERTY → CARD STATUS. The following
screen appears.
■
When “REMAIN” is selected:
1
5
3
4
4
2
1
Write-protect Mark
The mark appears if the P2 card is write-
protected.
2
P2 Card Status (remaining free space)
The remaining memory capacity of the P2 card is
indicated by a bar graph and percentage. The bar
graph indicator moves to the left as the remaining
free space decreases.
The following indications may appear, depending
on the card status:
•
FORMAT ERROR:
An unformatted P2 card is inserted.
•
NOT SUPPORTED:
An unsupported card is inserted in the camera.
•
NO CARD:
P2 cards are not inserted.
Press the SET button to view the following data
for the card in the selected slot (indicated in
yellow numbers).
•
BRAND: maker name
•
MODEL NO.: model number
•
SERIAL NO.: serial number
•
USER ID: user ID
•
WARNING: DIR ENTRY NG (DIR location error)
RUN DOWN CARD (life)
3
P2 Card Remaining Capacity/Total
Capacity
Displays the P2 card remaining capacity and total
capacity in minutes.
The total of the remaining memory capacity for
each P2 card that is displayed may not match
the actual total remaining memory capacity for
the P2 cards because only the figure in minute is
displayed.
4
Total remaining memory capacity for all
cards
• Displays the total remaining free space for all 4
slots.
Please note that the remaining capacity of a
write-protected P2 card is not included in the
total remaining capacity.
• When REC FUNCTION (RECORDING SETUP)
is set to LOOP, the total remaining memory
capacity for all cards indicates the minimum
guaranteed recording time for the loop
recording. When “REMAIN” is selected, the
value of this indication is smaller than the actual
possible recording time.
5
Warning card mark
The mark appears when the following P2 cards
are inserted.
• DIR ENTRY NG
• RUN DOWN CARD
Use the
2
P2 card status to check the nature of
the warning.
■
When “USED” is selected:
1
5
3
4
2
1
Write-protect Mark
The mark appears if the P2 card is write-
protected.
2
P2 Card Status (used memory capacity)
The used memory capacity of the P2 card is
indicated by a bar graph and a percentage figure.
The bar graph indicator moves to the right as the
used memory capacity increases.
The following indications may appear, depending
on the card status:
•
FORMAT ERROR:
An unformatted P2 card is inserted.
•
NOT SUPPORTED:
An unsupported card is inserted in the camera.
•
NO CARD:
P2 cards are not inserted.
Press the SET button to view the following data
for the card in the selected slot (indicated in
yellow numbers).
•
BRAND: maker name
•
MODEL NO.: model number
•
SERIAL NO.: serial number
•
USER ID: user ID
•
WARNING: DIR ENTRY NG (DIR location error)
RUN DOWN CARD (life)