Adjusting the white balance and black balance, Adjusting the white balance, Adjusting the white balance and black balance 2 – Panasonic AG-HPX500E User Manual

Page 50

Advertising
background image

50

Adjusting the White balance and Black Balance

C

h

ap

te

r 4 A

d

ju

st

m

en

ts a
n

d S
et

tin

g

s f

o

r R
ec

o

rd

in

g

Adjusting the White balance and Black Balance

2

Adjust the ND FILTER control according
to the light conditions.

For examples of ND FILTER adjustments, see
[Shooting and Recording/Playback Functions
Section] (page 19).

3

Place a white pattern at a point where
the light conditions match those for the
light source of the subject. Then zoom-
in on the white pattern so that white
colour appears in the screen.

• A white object (cloth or wall) may be used

instead of a white pattern. The illustration
below shows the required size for the white
space.

<Note>
• Do not include a high-intensity spot in the

screen.

• The white object must appear at the center of

the screen.

1/4 or more of the screen in width

1/3 or more of the
screen in height

4

Adjust the lens iris.

• Display the center marker and adjust the iris

to obtain a 70% indication.

5

Turn the AUTO W/B BAL switch toward
[AWB] and release it.

• The switch returns to the central position with

the white balance automatically adjusted.

6

During an adjustment, the viewfinder
displays the following message:

AWB Ach ACTIVE

To record high-quality video with the AG-HPX500P/
E, the black and white balances must be adjusted
according to conditions.
For higher quality, it is recommended that the
adjustments should be made in this order AWB
(white balance adjustment) → ABB (black balance
adjustment) → AWB (white balance adjustment).

Adjusting the White Balance

Whenever light conditions change, the white balance
must be readjusted.
To adjust the white balance, follow the steps below.

1

ND FILTER control

This control adjusts the amount of light entering
the CCD.

2

AUTO W/B BAL switch

Use for automatic control of white balance.

3

GAIN selector switch

Normally set to 0 dB. If this is too dark, adjust
gain as necessary.

4

OUTPUT selector switch

Set to CAM.

5

WHITE BAL switch

Set to A or B.

1

Set the GAIN, OUTPUT and WHITE BAL
switches.

1

2

3

5

4

Advertising