Panasonic AG-HPX500E - Manual (Page 36)

36
Basic Procedures
C
h
ap
te
r 3 R
ec
o
rd
in
g a
n
d P
la
yb
ac
k
4
To use the electronic shutter, set the
shutter speed and shutter mode.
For more information, see [Setting the
Electronic Shutter] (page 53).
5
Press the REC START/STOP button to
start recording.
• During recording, the REC lamp in the
viewfinder stays illuminated.
6
To stop recording, press the REC
START/STOP button.
• The REC lamp in the viewfinder goes out.
<Note>
■
Operation Buttons
In CAMERA mode, all operation buttons (REW, FF, PLAY,
STILL, STOP) are disabled.
Normal Recording
• Pressing the REC START/STOP button starts
recording of video and sound on the P2 card.
• The video and audio (including additional
information) recorded in one session is referred to as
a clip.
<Note>
Pressing the REC START/STOP button will not
immediately stop data write operations to a P2 card
in the following situations. And the REC START/STOP
button operation is not recognized.
• When terminating a short recording
• When terminating a recording that has just continued
onto a second P2 card
REC START/STOP button