Panasonic AG-HPX500E - Manual (Page 105)

105
Thumbnail Operations
C
h
ap
te
r 6 M
an
ip
u
la
tin
g C
lip
s w
ith T
h
u
m
b
n
ail
s
2
Additional clips can be selected by
repeating Step 1.
It is possible to display only the selected thumbnails
in the thumbnail screen for playback. Please refer to
[Switching the Thumbnail Display] (page 105) for more
information.
Switching the Thumbnail
Display
The display can be switched so that only those clips
matching the specified conditions are displayed in the
thumbnail screen.
1
Press the MODE button to enter the
MCR mode.
• The thumbnail screen appears on the LCD
monitor.
2
Press the thumbnail menu button to
open the menu.
3
Move the pointer to THUMBNAIL and
select with the SET button.
• The setting sub-menu appears.
• Select the desired item to specify the type of
thumbnail display.
• ALL CLIP:
Display all clips.
• SAME FORMAT CLIPS:
The clips in the same recording (or MCR) format are
displayed.
• SELECTED CLIPS:
Display randomly selected clips.
• MARKED CLIPS:
Display clips with shot marks attached.
• TEXT MEMO CLIPS:
Clips with text memos are displayed. Thumbnails at
text memo positions, time codes (TC), total number
of memos and the current order of the clips are
displayed.
• SLOT CLIPS:
Display clips recorded in the P2 card inserted in the
specified slot.
• SETUP:
Various setup operations are performed.
• EXIT:
The previous screen reappears.
■ To delete a text memo
1
Select THUMBNAIL → TEXT MEMO
CLIPS, move the cursor to the text
memo to be deleted and press the SET
button.
2
Move the cursor to the text memo
thumbnail to be deleted.
3
Press the MENU button to open the
setting menu and choose OPERATION
→
DELETE.
• The text memo is deleted.
• Pressing the thumbnail button and selecting
EXIT returns the pointer to the top of the
thumbnail display.
Thumbnail menu button
CURSOR and SET buttons
Thumbnail menu button
LCD Monitor
THUMBNAIL Button