Panasonic AG-HPX500E - Manual (Page 120)

120
Setup menu list
C
h
ap
te
r 7 M
en
u O
p
er
at
io
n
s
Setup menu list
■ Marks used in the list
: Indicates that the item can be set in the CAMERA mode.
: Indicates that the item can be set in the MCR mode.
/
: Indicates that the item can be set in both CAMERA and MCR modes.
SCENE FILE screen
Item Description of settings (Items in bold are factory settings.)
LOAD/SAVE/INIT Saves, loads and initializes scene files.
●
----(No operation), LOAD (Load), SAVE (Save), INITIAL (Initialize)
OPERATION TYPE
Switches the shutter and frame rate operation to the video type or film type.
●
VIDEO CAM: SYNCRO SCAN is set in 1/n increments. The frame rate is dependent on the REC
FORMAT. Slow shutter speeds are enabled. Time code is displayed at 30 frames
except at 24PN. (25 frames at 50 Hz)
● FILM CAM: SYNCRO SCAN is displayed as an angle. FRAME RATE can be used to vary the frame
rate. Slow shutter speeds are disabled. The time code indication is fixed at 24 hour
display. (25 frames at 50 Hz)
FRAME RATE
Selects the shooting interval and exposure time when 720P and FILM CAM TYPE is selected. The
default values for the REC FORMAT 720/60, 720/30 and 720/24 are fixed at 60P, 30P and 24P,
respectively.
●
59.94Hz SYSTEM
DEFAULT, 12, 18, 20, 22, 24, 26, 30, 32, 36, 48, 60
●
50Hz SYSTEM
DEFAULT, 12, 18, 20, 23, 25, 27, 30, 32, 37, 48, 50
SYNCRO SCAN
Adjusts the synchro scan shutter speed used for shooting images on a TV screen, etc. Turn and hold
the JOG dial button (operation button) upwards or downwards to increase the speed at which the set
values change.
●
When VIDEO CAM is selected as the OPERATION TYPE option setting:
• 60P/60i: 1/60.0 ... 1/249.8
• 50P/50i: 1/50.0 ... 1/248.9
• 30P/30PN: 1/30.1 ... 1/48.0 ... 1/249.8
• 25P/25PN: 1/25.0 ... 1/48.0 ... 1/248.9
• 24P/24PA/24PN: 1/24.0 ... 1/48.0 ... 1/249.8
● When FILM CAM is selected as the OPERATION TYPE option setting:
• The shutter speed is displayed as an angle such as “180.0d.”
• 10.0 deg ...
180.0 deg ... 360.0 deg (the angle can be changed in increments of 0.5 degrees)
DETAIL LEVEL Adjusts the level of the image outline correction (in the horizontal and vertical directions).
●
Adjustable range: – 7 ... 0 ... + 7
V DETAIL LEVEL Adjusts the level of outline correction in the vertical direction.
●
Adjustable range: – 7 ... 0 ... + 7
DETAIL CORING
Adjusts the level of noise reduction of the detail signal.
●
Adjustable range: – 7 ... 0 ... + 7
Set to – for a clearer image. Noise increases slightly. Set to + to reduce noise.
CHROMA LEVEL Adjusts the chroma level.
●
Adjustable range: – 7 ... 0 ... + 7
CHROMA PHASE Makes fine adjustments to the chroma phase.
●
Adjustable range: – 7 ... 0 ... + 7
COLOR TEMP Ach Makes fine adjustments to the color temperature (after white balance adjustment of Ach).
●
Adjustable range: – 7 ... 0 ... + 7
COLOR TEMP Bch Makes fine adjustments to the color temperature (after white balance adjustment of Bch).
●
Adjustable range: – 7 ... 0 ... + 7
MASTER PED Adjusts the black master pedestal that serves as the video reference.
●
Adjustable range: – 100 ... 0 ... + 100
A. IRIS LEVEL Sets the desired AUTO IRIS level.
●
Adjustable range: – 10 ... 0 ... + 10