To prevent accidental erasure of p2 card content, P2 card access led and status of p2 cards, P2 card recording times – Panasonic AG-HPX500E User Manual

Page 32: Handling p2 card recording, Splitting clips recorded on p2 cards

Advertising
background image

32

P2 Cards

C

h

ap

te

r 3 R

ec

o

rd

in

g a
n

d P
la

yb

ac

k

To Prevent Accidental
Erasure of P2 Card Content

To prevent the content of a P2 card being accidentally
erased, position the write-protect switch on the P2
card at [Protect].

<Note>
Write-protect switchover can be performed while the
card is being accessed (during recording or playback),
but does not take effect until access to the card ceases.

P2 CARD ACCESS LED and
status of P2 cards

P2 CARD

ACCESS

LED

Status of P2 Card

Stays on
in green

Recording

enabled

Writing and reading enabled.

Stays on
in orange

Selected for

recording

Writing and reading enabled for
current recording mode (loop,
interval or one-shot recording).

Blinks in
orange

Being

accessed

Writing or reading being
performed.

Quickly
blinks in
orange

Being

recognized

The P2 card is being
recognised.

Blinks in
green

Card full

The P2 card has no free space.
Only reading is enabled.

Write-protected

The write-protect switch on
the P2 card is positioned at
[PROTECT]. Only reading is
enabled.

Stays off

Card not

supported

The card is not supported by
your AG-HPX500P/E. Replace
the card.

Incorrect

format

The P2 card is not properly
formatted. Reformat the card.

Card not

inserted

No P2 card is inserted.
Card recognition standby.

<Note>
The ACCESS LED in the LCD monitor blinks when any of
the cards in slots 1 to 4 is being recorded or read, and
lights to indicate that the camera is ready to record. The
ACCESS LED is off when none of the inserted P2 cards
is available for recording.

P2 card recording times

Model

number

AJ-P2

C004HG

AJ-P2

C008HG

AJ-P2

C016RG

Capacity

4GB

8GB

16GB

DVCPRO

HD*

Approx. 4 min. Approx. 8 min.

Approx.

16 min

DVCPRO HD

720P/24PN

Approx.

10 min.

Approx.

20 min.

Approx.

40 min.

DVCPRO HD

720P/30PN
720P/25PN

Approx. 8 min.

Approx.

16 min

Approx.

32 min.

DVCPRO50

Audio 4CH

Approx. 8 min.

Approx.

16 min

Approx.

32 min.

DVCPRO/DV

Audio 2CH

Approx.

16 min

Approx.

32 min.

Approx.

64 min.

*

DVCPRO HD excludes 720P/30PN, 720P/24PN and
720P/25PN.

• This camera cannot use AJ-P2C002SG (2 GB)

cards.

• The indicated capacities include a management area

so the total area available for recording is somewhat
smaller.

Splitting clips recorded on P2 cards

This camera will automatically generate additional
clips for a continuous recording on an 8 GB or
higher capacity P2 card when the recording exceeds
the durations given below. Even so, a P2 device
will handle such clips as a single clip in thumbnail
operations (display, delete, recover, copy, etc.). Such
recordings may be handled as separate clips by
nonlinear editing software or a PC.

Recording format

Recording time

DVCPRO HD*

Approx. 5 min.

DVCPRO50

Approx. 10 min.

DVCPRO/DV

Approx. 20 min.

*

DVCPRO HD excludes 720P/30PN, 720P/24PN and
720P/25PN.

• Use of cards other than the above may require

updating the camera driver. For details, see
[Updating Camera Drivers] (page 144).

• For the latest information not available in the

Operating Instructions, visit the P2 Support Desk at
the following Web site.
https://eww.pavc.panasonic.co.jp/pro-av/

Handling P2 Card Recording

The P2 card is a semiconductor memory card
designed for the DVCPRO P2 series, Panasonic’s line
of professional video and broadcast equipment.

Write-protect switch

Advertising