Panasonic AG-HPX500E - Manual (Page 125)

125
Setup menu list
C
h
ap
te
r 7 M
en
u O
p
er
at
io
n
s
Item Description of settings (Items in bold are factory settings.)
F.MIC POWER2 Turns on and off the phantom power supply for the front microphone connected to CH2.
●
ON, OFF
R.MIC POWER Turns on and off the phantom power supply for the rear microphone.
●
ON, OFF
F.MIC CH1 LEVEL Selects the input level for the front microphone connected to CH1.
●
–40 dB, –50 dB, –60 dB
F.MIC CH2 LEVEL Selects the input level for the front microphone connected to CH2.
●
–40 dB, –50 dB, –60 dB
R.MIC CH1 LEVEL Selects the input level for the rear microphone connected to CH1.
●
–50 dB, –60 dB
R.MIC CH2 LEVEL Selects the input level for the rear microphone connected to CH2.
●
–50 dB, –60 dB
HEADROOM
Sets the headroom (standard level).
●
59.94Hz System: 18 dB, 20 dB
● 50 Hz System: 18 dB, 20 dB
MONITOR MODE
Switches speaker and earphone audio delay.
●
LIVE: No audio delay
● RECORDING: Recorded (delayed) audio
OUTPUT SEL screen
Item Description of settings (Items in bold are factory settings.)
CMPNT/SDI SEL
/
Selects D or SDI connector.
●
59.94Hz system: AUTO, 1080i, 480i
● 50 Hz system: AUTO, 1080i, 576i
If this item is set to AUTO, the REC FORMAT setting will be applied.
SDI METADATA
/
Turns on and off metadata superimposition onto the SDI signal.
●
ON, OFF
SDI EDH
/
Turns on and off EDH superimposition onto the SD-SDI signal.
●
ON, OFF
TC VIDEO SYNCRO
Selects whether to delay time code output.
●
TC IN: Outputs the input from the TC IN connector without delay.
● VIDEO: Outputs the time code with delay according to the output video.
DISPLAY SETUP screen
Item Description of settings (Items in bold are factory settings.)
ZEBRA DETECT Selects the brightness level of the leftleaning zebra patterns on the screen.
●
50 %, 55 %, 60 %, 65 %, 70 %, 75 %, 80 %, 85 %, 90 %, 95 %, 100 %, 105 %
MARKER
Turns on or off the center marker display.
●
ON, OFF
Set this item to ON to display the marker. The brightness status is also displayed.
SAFETY ZONE Sets SAFETY ZONE.
●
OFF, 90 %, 4:3
DATE/TIME
/
Sets whether to display the date and time on the screen and whether to output from the VIDEO IN/OUT
jack.
●
OFF: The date and time are not displayed.
● TIME: The time is displayed.
● DATE: The date is displayed.
● TIME&DATE: The time and date are displayed.
LEVEL METER
/
Select ON to display the audio level meter.
●
ON, OFF
ZOOM
Turns zoom value display on and off.
●
ON, OFF
Displays zoom values between Z00 to Z99.
CARD/BATT
/
Turns on and off card and battery remaining level.
●
ON, OFF
P2CARD REMAIN
/
Switches the indication of remaining P2 memory card capacity.
●
TOTAL: Indicates total remaining capacity of all cards.
● ONE-CARD: Indicates the remaining capacity of the card that is being recorded.